Acer Altos R700 - Manual (Page 63)

53
Running the Adaptec SCSISelect Utility
Each host adapter includes an onboard SCSISelect configuration utility
that allows you to configure/view the settings of the host adapter and
devices in the server.
The system finds the Adaptec AIC-7899 SCSI host adapter and displays
the message Adaptec AIC-7899 SCSI BIOS V x.xxx where x.xxx is the
version number of the SCSISelect utility.
Pressing at this time allows you to configure the Adaptec AIC-
7899 SCSI host adapter.
When to Run the Adaptec SCSISelect Utility
Use the SCSISelect utility to:
• Change default values
• Check and/or change SCSI device settings that may conflict with
those of other devices in the server
• Do a low-level format on SCSI devices installed in the server
Running the SCSISelect Utility
1 When this message appears on the video monitor:
<< for SCSISelect(TM) Utility!>>>
2 Press to run the utility. When the main menu for the host
adapter appears, choose the device that you want to configure-
each SCSI bus accepts up to 15 devices.
Use the following keys to navigate through the menus and submenus:
Press To
ESC Exit the utility
Enter Select an option
↑ Return to previous option
↓ Move to the next option
AR700SB-e.book Page 53 Monday, September 30, 2002 9:09 AM