Acer Altos R700 - Manual (Page 104)

6 Technical Reference 94
Server Board Jumpers
Label Jumper Name What it does at system reset
A RJ-45 Serial Port
Config Configures either a DSR or a DCD signal to
the connector. See “RJ-45 Serial Port” on
page 15.
B CMOS CLR If these pins are jumpered, the CMOS
settings are cleared. These pins should not
be jumpered for normal operation.
C PSWD CLR If these pins are jumpered, the password is
cleared. These pins should not be
jumpered for normal operation.
AR700SB-e.book Page 94 Monday, September 30, 2002 9:09 AM