Acer Altos R700 - Manual (Page 18)

1 Description 8
Memory
The system board has six 168-pin DIMM slots each supporting 72-bit
ECC registered DDR DIMMs (DDR-200 or DDR-266 compatible). Memory
is partitioned in three banks. You may install a minimum of 256 MB
(128MB x 2) and as much as 12 GB. Memory must be installed in pairs,
starting with bank 1 (slots 1B and 1A).
The controller automatically detects, sizes, and initializes the memory
array, depending on the type, size, and speed of the installed DIMMs,
and reports memory size and allocation to the server via configuration
registers.
Note: Use DIMMs that have been tested for compatibility with the
server board. Contact your sales representative or dealer for a
current list of approved memory modules.
AR700SB-e.book Page 8 Monday, September 30, 2002 9:09 AM