beautypg.com

Acer Altos R700 User Manual

Page 102

background image

5 Solving Problems

92

persists, try a different cable.

Make sure the hub port is configured for the same duplex mode as
the network controller.

Check with your LAN administrator about the correct networking
software that needs to be installed.

If you are directly connecting two servers (no hub), you will need a
crossover cable (see your hub documentation for more
information on crossover cables).

Check the network controller LEDs that are visible through an
opening at the system back panel.

AR700SB-e.book Page 92 Monday, September 30, 2002 9:09 AM