Acer AR585 F1 - Manual (Page 52)

Appendix B Acer Smart Console 40
User Privileges
The User List page includes a privilege setting for determining the
maximum privilege a user can have to the system. Users can be
configured to have certain access permissions, such as administrator
privilege, operator privilege, no access. The BMC (Baseboard
Management Controller) maintains a local database of remote access
users and their privileges. When the user logs in to the console, BMC
determines the user's privileges and executes commands according to
the privilege level.
The list below describes the privilege levels you can assign to a user.
•
No access: Users assigned this privilege have the least amount of
system access. This is considered the lowest privilege level.
• Operator: The operator privilege has restricted access. All BMC
commands are allowed, except for the configuration commands
that allows the user to change the behavior of the out-of-band
interfaces. Operator privilege can not disable individual channels
or change user access privileges.
• Administrator: The administrator privilege has full access and can
configure the software and add users. Administrator privilege
have access to all BMC commands, including configuration
commands for disabling a communication channel.
Modifying a user account
1 On the Users page click Modify User.
2 Enter the username.
3 Enter the password.
4 Re-enter the password.
5 Select a privilege level from the drop-down menu.
6 Click Modify.