Acer AR585 F1 - Manual (Page 32)

Appendix A Server management tools 20
Initialing a RAID volume
1 After creating the logical volumes on all of the RAID volumes, click
Accept then Yes to save the configuration.
2 Click Yes to initialize the new logical drives.
You will see all the logical drives listed.
3 Click Home to go back to the Configuration menu.
Assigning a Hot Spare Drive
1 Select a free disk marked as UNCONF GOOD and listed under
Physical Drives.
2 Select Make Global Dedicated HSP or Make Dedicated HSP and
click Go.
3 Click Home to go back to the Configuration menu.
You will see the disk marked as Hotspare in pink and listed under
Physical Drives.
4 Reboot the server and install the operating system. Select Exit,
click Yes and press + + .