Acer RC111 - Manual (Page 5)

5
• Do not overload a power outlet, strip or receptacle by plugging in
too many devices. The overall system load must not exceed 80% of
the branch circuit rating. If power strips are used, the load should
not exceed 80% of the power strip's input rating.
• This product's power supply is equipped with a three-wire
grounded plug. The plug only fits in a grounded power outlet.
Make sure the power outlet is properly grounded before inserting
the power supply plug. Do not insert the plug into a non-
grounded power outlet. Contact your electrician for details.
Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.
Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.
• The system can be powered using a wide range of voltages; 100 to
240 V AC. The power cord included with the system meets the
requirements for use in the country/region where the system was
purchased. Power cords for use in other countries/regions must
meet the requirements for that country/region. For more
information on power cord requirements, contact an authorized
reseller or service provider.
Product servicing
Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage points or other
risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to
qualified service personnel when:
• the power cord or plug is damaged, cut or frayed
• liquid was spilled into the product
• the product was exposed to rain or water
• the product has been dropped or the case has been damaged
• the product exhibits a distinct change in performance, indicating a