Acer Altos G530 User Manual
Page 54
3 System upgrade
44
To install the easy-swap SCSI HDD cage:
The easy-swap SCSI HDD cage is an optional four-bay internal HDD
enclosure without a SCSI backplane board.
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
2
Remove the HDD cage bay cover. See page 39.
3
Remove the screw that secures the cover to the empty HDD bay,
then detach the cover.
4
Install the easy-swap cage.
(1) Slide the cage into the chassis. The cage is locked to the chassis
with an audible click.
(2) Locate and attach the following cables to their corresponding
connectors on the SCSI hard drive and SCSI RAID card. For
instructions on how to install a SCSI RAID card see page 70.
(1) SCSI data cable