Acer S5201 User Manual
Page 7
7
Eng
lis
h
2
Enable your WLAN and select the access point labeled AcerProjector or
AcerProjectorXXXX to connect wirelessly. Connect the projector to your
LAN for a wired connection.
3
Open the Internet browser (see note). Click Download Acer eProjection
Management on the welcome page, and then click Run to launch the
Welcome to the Acer Projector Gateway Setup Wizard. The installation will
proceed automatically. Make sure the installation is complete.
Note: If you do not see the welcome page or cannot connect to
the wired network, please enter the Server IP address (the second
Internet