Acer S5201 - Manual (Page 5)

5
Eng
lis
h
Check the information on the splash screen
Take note of the important information on the splash screen. The splash screen
displays the following items: Projector ID (a), Acer logo (b), network
information (c) and instructions (d).
Projector ID (displayed only when available)
This 4-digit number will not be displayed on the top left of the splash screen
until this option is enabled by the supervisor in the Configure tab under Acer
eProjection Management. The four digits are given randomly for projector
identification. For more information, please see General Settings on page 27.
Projector Name (SSID)
The Projector Name and initial Service Set ID (SSID) can be added by the
supervisor on the Configure tab of Acer eProjection Management. For more
information, please see Network Settings on page 28.
Server IP
The Server IP indicates the IP address your projector uses to connect to a wired
or wireless network. It will be 192.168.100.10 for general wireless and wired
connections. The Server IP will be assigned by the wired network with DHCP
enabled. For more information, please see Network Settings on page 28.
Security: (None, WEP, WPA-PSK, WPA2-PSK)
Wired Equivalent Privacy or Wireless Encryption Protocol (WEP) is a scheme to
secure wireless networks. It is part of the IEEE 802.11 wireless networking