AEG HC452020EB - Manual (Page 25)

• To change the Count Down Tim-
er:set the cooking zone with touch
or .
• To deactivate the Count Down
Time: set the cooking zone with .
Touch . The remaining time counts
back to
00
. The indicator of the
cooking zone goes out.
When the timer countdown comes to
an end, the sound operates and
00
flashes. The cooking zone deactivates.
• To deactivate the sound: touch
The Count up timer
Use the Count up timer to monitor how
long the cooking zone operates.
• The selection of the cooking zone (if
more than 1 cooking zone oper-
ates) : touch
again and again until
the indicator of a necessary cooking
zone comes on.
When this function is activated,
comes on.
• To activate the Count up timer:
Touch
The symbol goes out and comes
on.
• To see how long the cooking zone
operates:set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the zone oper-
ates. The display shows the time of
the cooking zone that operates for
longer period of time.
• To deactivate the Count up timer:
set the cooking zone with and
touch or to deactivate the timer.
the symbol goes out and comes
on.
When the two Timer functions
operate at the same time, the
display shows the Count Up Tim-
er first.
The Minute minder.
You can use the timer as a minute mind-
er while the cooking zones do not oper-
ate. Touch
.
Touch or of the timer to set the
time. When the time comes to an end,
the sound operates and
00
flashes.
• To stop the sound: touch
4.7 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting.
When
operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The indicator comes on.
• To deactivate this function touch .
The heat setting that you set before
comes on.
4.8 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the
heat setting.
First set the heat settings.
To activate this function touch
. The
indicator comes on.
The Timer stays on.
To deactivate this function touch
.
The indicator goes out.
When you deactivate the appliance, you
also deactivate this function.
4.9 The Child Safety Device
This function prevents an accidental op-
eration of the appliance.
To activate The Child Safety Device
• Activate the appliance with . Do
not set the heat settings.
• Touch for 4 seconds. The indicator
comes on.
• Deactivate the appliance with .
To deactivate The Child Safety Device
• Activate the appliance with . Do
not set the heat settings. Touch
for 4 seconds. The indicator goes out.
• Deactivate the appliance with .
ENGLISH
25