Arcam FMJ BDP100 - Manual (Page 27)

e-25
english
Audio Format Digital Output setting HDMI out Optical/Coax out
Dolby Digital
Bitstream HD Dolby Digital 5.1 Dolby Digital 5.1
Bitstream Legacy Dolby Digital 5.1 Dolby Digital 5.1
Bitstream Mixed DTS 5.1 DTS 5.1
PCM 7.1 PCM 5.1 PCM Stereo
PCM 5.1 PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
Dolby Digital Plus /
Dolby TrueHD
Bitstream HD Dolby Digital Plus /
Dolby TrueHD
Dolby Digital 5.1
Bitstream Legacy Dolby Digital 5.1 Dolby Digital 5.1
Bitstream Mixed DTS 5.1 DTS 5.1
PCM 7.1 PCM 7.1 PCM Stereo
PCM 5.1 PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
DTS-HD High
resolution Audio /
DTS-HD Master Audio
Bitstream HD DTS-HD High
resolution Audio /
DTS-HD Master Audio
PCM Stereo
Bitstream Legacy DTS 5.1 DTS 5.1
Bitstream Mixed DTS 5.1 DTS 5.1
PCM 7.1 PCM 7.1 PCM Stereo
PCM 5.1 PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
DTS
Bitstream HD DTS 5.1 DTS 5.1
Bitstream Legacy DTS 5.1 DTS 5.1
Bitstream Mixed DTS 5.1 DTS 5.1
PCM 7.1 PCM 5.1 PCM Stereo
PCM 5.1 PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
LPCM 7.1 (48kHz /
96kHz)
Bitstream HD PCM 7.1 PCM Stereo
Bitstream Legacy PCM 7.1 PCM Stereo
Bitstream Mixed DTS 5.1 DTS 5.1
PCM 7.1 PCM 7.1 PCM Stereo
PCM 5.1 PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
LPCM 5.1 192kHz
Bitstream HD PCM Stereo PCM Stereo
Bitstream Legacy PCM Stereo PCM Stereo
Bitstream Mixed DTS 5.1 PCM Stereo
PCM 7.1 PCM Stereo PCM Stereo
PCM 5.1 PCM Stereo PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
LPCM 2.0
(44.1kHz / 48kHz)
Bitstream HD PCM Stereo PCM Stereo
Bitstream Legacy PCM Stereo PCM Stereo
Bitstream Mixed DTS 2.0 DTS 2.0
PCM 7.1 PCM Stereo PCM Stereo
PCM 5.1 PCM Stereo PCM Stereo
PCM Stereo PCM Stereo PCM Stereo
resolution setting Video Outputs
Composite video out Component video out HDMI out
nTSC PAL nTSC PAL nTSC PAL
HDMI Auto 480i 576i 1080i 1080i Preferred Preferred
1080p 480i 576i 1080i 1080i 1080p 1080p
1080i 480i 576i 1080i 1080i 1080i 1080i
720p 480i 576i 720p 720p 720p 720p
480p/576p 480i 576i 480p 576p 480p 576p
480i/576i 480i 576i 480i 576i 480i 576i
NOTES:
< If the HDMI and Component video outputs are used simultaneously, the Component video
will be output at standard definition (480i/576i resolution).
< Copy protected DVDs can only be output at standard definition over analogue video
connections (component or composite).
< If the BDP100 is set to a resolution that your TV does not support, there may be no picture.
If this happens, connect the Composite Video output to your TV. Select the appropriate
video input on your TV to display the settings menu. Change the resolution to a value
supported by your TV then change the connections back to the desired configuration.
< The ‘HDMI Auto’ setting uses the resolution value that the TV requests. This may not be
the best resolution. It is recommended to consult your TV documentation to discover the
best resolution setting and to set this resolution manually.
Video output Resolution
The following table shows the video output resolution
at each video output for the different resolution settings
(see “Display” on page E-21).