Arcam FMJ BDP100 - Manual (Page 14)

e-12
23425
CR104
SHIFT
T RND
STATUS iPOD
BD
CD
AV
TUN
PVR VCR
SAT
AMP
MODE MENU
RTN
U
SRCH
SETUP TITLE AUDIO SUBT
DISP
controlling the bdP100
The Cr104 is a sophisticated ‘universal’ remote control
that can control up to eight devices – including the
BDP100. As it’s a ‘learning’ remote, it can copy almost
any function from an existing single-device remote.
You can also program the Cr104 to issue a sequence of
commands (‘macros’) from a single button press.
Select the source key first
remember to select a source key before pressing
command buttons – commands vary depending on the
source selected.
To operate the BDP100 from the remote, first press the
BD source button.
TUN AV SAT
CD PVR VCR AMP
On/Stand-by
This allows the BDP100 to be put into and taken out of
stand-by remotely.
Navigation buttons
Arrow buttons allow navigation around the settings
menus on the BDP100 and disc menus.
Confirm a selection by pressing
OK .
Numeric keys
Used for data entry. Also gives direct access to
individual tracks on audio CDs.
VOLuME +/–
Adjusts the volume of a compatible amplifier.
MODE
This button activates the Picture-in-Picture Secondary
Video function, where available.
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, off).
0 /
Press to skip backwards to the previous track( 0 ) or
forwards to the next track ( / ).
MENu
Activates the BD ‘popup’ menu or the DVD disc menu.
STaTuS
Toggles the disc information display.
Press
SHIFT followed by STaTuS to activate or deactivate
24p mode (supported discs and TVs only).
RTN
navigates to the previous menu.
RND
Toggles random (‘shuffle’) play of chapters/tracks on
and off.
Press
SHIFT followed by RND to cycle through repeat play
options (chapter, title, disc, etc.).
Source selection and handset configuration
BD BD input/BD controls
SaT Satellite decoder input/SAT controls
aV Television (sound) input/AV controls
TuN radio tuner input/TUn controls
aMP Arcam amplifier
PVR Personal Video recorder input/controls
VCR Video Cassette recorder input/controls
CD CD player input/CD controls
Press the relevant button once to select input and
reconfigure the handset.
Press and hold the button until the power LED blinks
once if you wish to reconfigure the handset without
changing the input.
advanced controls
These buttons are described on the next page.
MuTE
Press once to mute an Arcam amplifier. Press again (or
use +/– volume) to un-mute.
OPEN
Opens and closes the disc tray
SETuP
Press
SETuP to access the system settings menu.
Playback control
Pause (
; ), Play ( 4 ) and Stop ( < ). SHIFT+Pause
activates slow playback.