Diodes AM9800 - Manual (Page 4)

Data Sheet
Three Phase Direct PWM Sensorless Motor Driver AM9800
Sep. 2012 Rev. 1. 0 BCD Semiconductor Manufacturing Limited
4
Ordering Information
AM9800 -
Circuit Type
Package Temperature Range Part Number Marking ID Packing Type
AM9800GS-G1 AM9800GS-G1 Tube
SSOP-16 -30 to 95 °C
AM9800GSTR-G1 AM9800GS-G1 Tape & Reel
BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS
compliant and green.
Absolute Maximum Ratings (T
A
=25
°C, Note 1)
Parameter Symbol Value Unit
Supply Voltage V
CC
6.5 V
Pre-drive Voltage (Gate Voltage) V
G
10 V
Output Current I
OUT
0.7 A
PWM Input Withstand Voltage V
PWM
V
CC
V
FG Output Withstand Voltage V
FG
6 V
FG Output Current I
FG
5 mA
Power Dissipation1 (Independent IC) P
D1
0.3 W
Power Dissipation2 (Note 2) P
D2
0.8 W
Ambient Temperature (Note 3) T
A
-40 to 105 °C
Storage Temperature T
STG
-55 to 150 °C
ESD (Human Body Model) 4000 V
ESD (Machine Model) 300 V
Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.
Note 2: When mounted on 76.1mm×114.3mm×1.6mm glass epoxy board.
Note 3: T
J
=150 °C. Use the IC in the range where the temperature of the chip does not exceed T
J
=150 °C during
operation.
G1: Green
TR: Tape & Reel
Blank: Tube
Package
GS: SSOP-16