Diodes PDS360Q - Manual

POWERDI is a registered trademark of Diodes Incorporated.
PDS360Q
Document number: DS36911 Rev. 1 - 2
1 of 5
www.diodes.com
February 2014
© Diodes Incorporated
PDS360Q
3A SCHOTTKY BARRIER RECTIFIER
POWERDI ®
Product Summary
V
R
(V) I
F
(A)
V
F MAX
(V)
@ +25°C
I
R MAX
(mA)
@ +25°C
60 3.0 0.62 0.15
Description
This Schottky Barrier Rectifier has been designed to meet the
stringent requirements of Automotive Applications.
Applications
It is ideally suited to use as :

Polarity Protection Diode
 Re-circulating Diode
 Switching Diode
Features and Benefits
 Guard Ring Die Construction for Transient Protection
 Low Power Loss, High Efficiency
 Low Reverse Leakage Current
 For Use in High Frequency Inverters, Free Wheeling, and
Polarity Protection Applications
 High Forward Surge Current Capability
 Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
 PPAP Capable (Note 4)
Mechanical Data
 Case: POWERDI5
 Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
 Polarity: See Diagram
 Weight: 0.093 grams (approximate)
Ordering Information
(Note 4)
Part Number Compliance Case Packaging
PDS360Q-13 Automotive POWERDI5 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
Top View Bottom View
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
S360 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 14 for 2014)
WW = Week code (01 - 53)
K = Factory Designator
YYWWK
S360
Green
POWERDI5