Diodes SB520 - SB560 - Manual

DS23024 Rev. 8 - 2 1 of 3 SB520 - SB560
www.diodes.com
ã
Diodes Incorporated
SB520 - SB560
5.0A SCHOTTKY BARRIER RECTIFIER
Features
DO-201AD
Dim Min Max
A 25.40 ¾
B 7.20 9.50
C 1.20 1.30
D 4.80 5.30
All Dimensions in mm
A A B
C
D
Maximum Ratings and Electrical Characteristics @ T
A
= 25 °C unless otherwise specified
·
Epitaxial Construction
·
Guard Ring Die Construction for Transient Protection
·
Low Power Loss, High Efficiency
·
High Surge Capability
·
High Current Capability and Low Forward Voltage Drop
·
Surge Overload Rating to 150A Peak
·
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
·
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·
Case: DO-201AD
·
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·
Moisture Sensitivity: Level 1 per J-STD-020C
·
Terminals: Finish ¾ Bright Tin. Plated Leads Solderable
per MIL-STD-202, Method 208
·
Polarity: Cathode Band
·
Mounting Position: Any
·
Ordering Information: See Last Page
·
Marking: Type Number
·
Weight: 1.1 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol SB520 SB530 SB540 SB550 SB560 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V
RRM
V RWM
V
R
20 30 40 50 60 V
RMS Reverse Voltage V
R(RMS)
14 21 28 35 42 V
Average Rectified Output Current (See Figure 1) (Note 1) I
O 5.0 A
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
(JEDEC Method)
I
FSM 150 A
Forward Voltage (Note 2) @ I
F
= 5.0A V
FM 0.55 0.67 V
Peak Reverse Current @ T A = 25 °C
at Rated DC Blocking Voltage (Note 2) @ T
A
= 100 °C
I
RM
0.5
mA
50 25
Typical Thermal Resistance Junction to Ambient (Note 1)
(Note 3)
R qJA 25
°C/W
R qJL 8
Operating Temperature Range T
j -65 to +125 -65 to +150
°C
Storage Temperature Range T
STG -65 to +150
Notes: 1. Measured at ambient temperature at a distance of 9.5mm from case.
2. Short duration test pulse used to minimize self-heating effect.
3. Thermal resistance junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length.
4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.