Diodes ZXMS6004FF User Manual
Zxms6004ff, Product summary, Description
ZXMS6004FF
Document number: DS33609 Rev. 5 - 2
1 of 8
March 2014
© Diodes Incorporated
ZXMS6004FF
IntelliFET is a trademark of Diodes Incorporated, registered in the United States and other jurisdictions worldwide.
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
INTELLIFET™ MOSFET
Product Summary
Continuos drain source voltage 60V
On-state resistance 500mΩ
Nominal load current (V
IN
= 5V) 1.3A
Clamping Energy 90mJ
Description
The ZXMS6004FF is a self protected low side MOSFET with logic
level input. It integrates over-temperature, over-current, over-voltage
(active clamp) and ESD protected logic level functionality. The
ZXMS6004FF is ideal as a general purpose switch driven from 3.3V
or 5V microcontrollers in harsh environments where standard
MOSFETs are not rugged enough.
Applications
Especially suited for loads with a high in-rush current such as
lamps and motors
All types of resistive, inductive and capacitive loads in switching
applications
μC compatible power switch for 12V and 24V DC applications
Automotive
rated
Replaces
electromechanical
relays and discrete circuits
Linear Mode capability - the current-limiting protection circuitry is
designed to de-activate at low VDS to minimize on state power
dissipation. The maximum DC operating current is therefore
determined by the thermal capability of the package/board
combination, rather than by the protection circuitry. This does not
compromise the product’s ability to self-protect at low VDS.
Features and Benefits
Compact high power dissipation package
Low input current
Logic Level Input (3.3V and 5V)
Short circuit protection with auto restart
Over voltage protection (active clamp)
Thermal shutdown with auto restart
Over-current
protection
Input Protection (ESD)
High continuous current rating
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
Case:
SOT-23F
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish
Weight: 0.012 grams (approximate)
Ordering Information
(Note 4)
Product
Marking
Reel size (inches)
Tape width (mm)
Quantity per reel
ZXMS6004FFTA
1K6
7
12
3,000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. S more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at
Marking Information
1K6 = Product type Marking Code
Top View
SOT23F
Top view
Pin Out
S
IN
D
1K6