Diodes ZTX796A - Manual (Page 2)

ZTX796A
Document Number DS31908 Rev. 3 - 2
2 of 7
www.diodes.com
May 2013
© Diodes Incorporated
ZTX796A
A Product Line of
Diodes Incorporated
Maximum Ratings
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Collector-Base Voltage V
CBO
-200 V
Collector-Emitter Voltage V
CEO
-200 V
Emitter-Base Voltage V
EBO
-5 V
Continuous Collector Current I
C
-0.5 A
Peak Pulse Current I
CM
-1 A
Thermal Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Power Dissipation (Note 5) P
D
1.5 W
Power Dissipation (Note 6) P
D
1 W
Thermal Resistance Junction to Ambient (Note 5) R
JA
116 °C/W 
Thermal Resistance Junction to Ambient (Note 6) R
JA
175 °C/W 
Thermal Resistance Junction to Lead (Note 7) R
JL
70 °C/W 
Operating and Storage Temperature Range T
J,
T
STG
-55 to +200 °C
Notes: 5. For a through-hole device mounted at the seating plane (2.5mm lead length) with the collector lead on 25mm x 25mm 1oz copper
that is on a single-sided FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.
6. Same as note (5), except the device is mounted on minimum recommended pad layout with 12mm lead length from the bottom of package to the board.
7. Thermal resistance from junction to solder-point at the seating plane (2.5mm from the bottom of package along the collector lead).