AVSL Citronic CLA-300 - Manual (Page 7)

171.227, 171.228 User Manual
Connection

Using the supplied speaker leads, connect 4 passive units to one sub unit as shown below.

For multiple arrays, connect each group of 4 passive units to one sub unit.

No more than 4 passive units may be connected to a single sub.

Use the supplied IEC lead to connect to mains, ensuring correct voltage and power capacity

Connect signal input via XLR (connect to LINE input – not to be confused with RS-485 input)

To continue the signal onto further units, connect from the XLR LINE output