AVSL Citronic CLA-300 - Manual (Page 11)

171.227, 171.228 User Manual
Once the CLA-300 device is detected, a Device Select window will appear as shown here.
Connected devices are listed on the left, showing the ID number. The current selected device ID
number is displayed on the left-hand side. In multiple array setups, each must be allocated an
individual ID number if they are to be controlled separately.
To load the current internal program from the CLA-300 into the software for editing, select “Upload
Program Data From Device”. If the program currently held in the software is to be loaded into the
CLA-300, select “Download Program Data To Device”
Select the required device by clicking on it on the right-hand side of the window and click “Connect”
The current program status will populate the control window as shown below.