AVSL 152.765 THE FLY - Manual (Page 10)

152.763UK User Manual
Control panel options
Display Mode Press ENTER for setting (press FUNC to exit)
 Auto modes  (RBP),  (blue),  (red),  (purple) 
 Sound activated modes  (RBP),  (blue),  (red),  (purple) 
 Microphone sensitivity  (minimum) to  (maximum)
 DMX start address  to 
 Slave mode 
 = direct slave mode (mimics master unit) 
 = 0.2s delay…  = 1.0s delay 
 Remote mode  = handheld IR remote controlled
 Laser test  = produces purple cross for checking image
Stand-alone modes
THE FLY laser can operate in stand-alone mode one of 2 ways: Auto or Sound-activated
Auto mode
 Press the FUNC button and navigate until  is displayed
 Press ENTER and 4 options are available using the UP and DOWN buttons
o  - Steps through all patterns with red, blue and purple colour
o  - Steps through all patterns with blue colour only
o  - Steps through all patterns with red colour only
o  - Steps through all patterns with purple colour only
 Press ENTER to confirm the required mode
Sound-activated mode
 Press the FUNC button and navigate until  is displayed
 Press ENTER and 4 options are available using the UP and DOWN buttons
o  - Sound-activated patterns with red, blue and purple colour
o  - Sound-activated patterns with blue colour only
o  - Sound-activated patterns with red colour only
o  - Sound-activated patterns with purple colour only
 Press ENTER to confirm the required mode