AVSL 160.028 UV CANNON - Manual

1/1
400W BLACK LIGHT
160.028
USER MANUAL
INTRODUCTION
Congratulations on the purchase of your new our company lighting effect. We are confident you will enjoy
many trouble free hours with this unit . To assist with the care and use of the product we have prepared this
short guide.
OPERATION
Before connecting this unit to the mains power supply for the first time you must first install the lamp .
(See ‘Replacing Lamp’ for details).
This lighting effect has been designed to function on a mains power supply of either 240V~50Hz and has been
fitted with a suitable power plug for use with your local voltage. Check the label on the unit and the power plug
for the correct voltage.
When connected to the mains power supply the unit should illuminate. The 160.028 utilizes a mercury vapor
lamp ,it will take 5 to 10 minutes to reach full intensity . The intensity of the lamp will increase with use. The
light emitted by the 160.028 is invisible and does not have the glow of a fluorescent fixture.
Due to the high operating temperature of halogen lamps it is advisable that the effect be used in well ventilated
areas taking care not to obstruct the air vents. To maximize lamp life, allow the unit to cool down before
moving or touching the lamp.
CAUTION
Due to the nature of the mercury vapor lamp, this lamp must be allowed to cool down (about 5 to10 minutes)
after being turned off before re-igniting. Failure to wait for cool down many cause the lamp to fail prematurely.
INSTALLATION/MOUNTION
Although this unit can be used in an upright position , it is recommended that , for safety purposes ,your
lighting effect be properly mounted using a suitable hanging clamp and safety cable . Our company offers a
range of items , which are ideal for safe mounting .
Use in a well-ventilated area without obstruction to air vents.