Asus P4S800D - Manual (Page 84)

3-14 Chapter 3: Software support
Split data (Boot from IDE): This operation will split the data from the source
disk into all the selected disks. In this operation, the boot disk
cannot be placed to boot from 180.
Split data (Boot from 180): This operation is similar to “Split data into RAID 0”
operation, but the system boots from 180.
OK: Starts the operation.
Cancel: Aborts the operation.
: Displays the remaining splitting data.
6. Click OK after completing the selection. The differential warning messages will
appear following the differential operations. Click Cancel if you want to exit the
dialog box.
7. If the operation is Split data into RAID 0, the following warning message
appears. Click Yes to continue or No to cancel.
8. When completed, a restart warning message appears. Click OK.