Creating an array for performance (raid 0) – Asus P4S800D User Manual

Page 83

ASUS P4S800D motherboard

3-13

Creating an Array for Performance (RAID 0)

Follow these steps to create a RAID 0 array:

1. From the SIS 180 RAID utility menu, click the Configuration tab then Create

Raid.

2. Click the Raid Type combo list box and select RAID 0.

3. Click the Block Size combo list box and select a block size you want.

4. Click the Mode combo list box and select a mode you want.

5. From the Available Disks pane, select a disk then click the down arrow to

add the disk on the Selected Disks pane.

5. After all fields and parameters are set, click the Create button to display the

Create Stripe RaidSet dialog box.

Item Notes:

Source:

Displays the first selected disk.

Target:

All available disks except the first selected disk.

Create Only:

This operation will destroy all data on the selected
disk and create a clean stripe array without any data.

You must have at least two hard disks installed to create a RAID 0 array.