beautypg.com

5 internal connectors – Asus ESC500 G3 User Manual

Page 62

background image

Chapter 3: Motherboard information

3-14

3.5

Internal connectors

1.

Intel

®

C226 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID

Mode]. Refer to section 4.6.3 SATA Configuration for details.

•

Before creating a RAID set, refer to section Chapter 5 RAID configurations or the

manual bundled in the motherboard support DVD.

• When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section

4.6.3 SATA Configuration for details.

See also other documents in the category Asus Computer hardware: