2 pch configuration – Asus ESC500 G3 User Manual
Page 107
4-29
ASUS ESC500 G3
4.6.2
PCH Configuration
PCI Express Configuration
Allows you to configure the PCI Express slots.
DMI Link ASPM Control [Auto]
Allows you to control the ASPM (Active State Power Management) on both Northbridge
side and Southbridge side of the DMI Link.
Configuration options: [Disabled] [Enabled] [Auto]
ASPM Support [Disabled]
Allows you to set the ASPM level.
Configuration options: [Disabled] [Auto] [L0s] [L1] [L0sL1]
PCIe Speed [Auto]
Allows you to select the PCI Express port speed.
Configuration options: [Auto] [Gen1] [Gen2]
Intel Rapid Start Technology [Disabled]
Allows you to enable or disable Intel
®
Rapid Start Technology.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set the Intel
®
Rapid Start Technology to
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S3 mode.
Configuration options: [Enabled] [Disabled
Entry After [0]
Allows you to set the RTC wake-up timer at S3 entry. The time ranges from
0 minute (immediately) to 120 minutes.
Active Page Threshold Support [Enabled]
The system automatically goes into sleep mode when the partition size is not enough
for the Intel
®
Rapid Start Technology to work.
Configuration options: [Enabled] [Disabled]