Asus P2L97-S - Manual (Page 31)

ASUS P2L97-S User’s Manual 31
III. INSTALLATION
(Connectors)
III. INST
ALLA
TION
12. Wake on LAN (3-pin WOL) (Reserved for future use)
This connector connects to LAN cards with a Wake On LAN output. When the
system is in soft-off mode, LAN activity will power on the system.
P2L97-S Wake on LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720ma +5-volt
standby power
PME
Ground
+5 Volt Standby
R
13. Ultra-Fast SCSI & Ultra-Wide SCSI Connectors
This motherboard has onboard 50-Pin Ultra-Fast SCSI connector for 8-bit SCSI
devices and 68-Pin Ultra-Wide SCSI connector for 16-bit SCSI devices.
P2L97-S Onboard SCSI Connectors
50-pin Fast SCSI II Connector
68-pin Fast & Wide SCSI III Connector
R
IMPORTANT: The 68-Pin Ultra-Wide SCSI Connector is always terminated and
will only work as an end device.
motherboard is an end device
and has permanent termination
Wide SCSI
device
middle SCSI devices must
not be terminated
Wide SCSI
device Wide SCSI
device (end)
last SCSI device
must be terminated
R
NOTE: Up tp 15 devices can be connected with 50-Pin Fast-SCSI and 68-Pin
Ultra-Wide SCSI combined.