Asus P5QL-EM - Manual (Page 34)

1-24 Chapter 1: Product introduction
5.. CPU,.Chassis,.and.Power.fan.connectors.(4-pin.CPU_FAN,.3-pin.CHA_FAN,.3-pin.
PWR_FAN)
The fan connectors support cooling fans of a total of 1A~2.2A (26.4W max.) at +12V.
Connect the fan cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! DO NOT place
jumper caps on the fan connectors.
P5QL-EM.Fan.Connectors
P5QL-EM
R
CPU_FAN
GN
D
CPU
FA
N PW
R
CPU
FA
N IN
CPU
FA
N PW
M
PWR_FAN
GN
D
Rotation
+12V
CHA_FAN
GND
Rotation
+12V
6.. USB.connectors.(10-1.pin.USB1112,.USB910,.USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module is purchased separately.
P5QL-EM
R
P5QL-EM.USB.2.0.Connectors
USB78
USB+5V USB_P8
-
USB_P8
+
GN
D
NC
USB+5V USB_P7
-
USB_P7
+
GN
D
1
USB910
USB+5V USB_P10- USB_P10+ GN
D
NC
USB+5V USB_P9- USB_P9+
GND
1
USB1112
USB+5V USB_P12- USB_P12+ GN
D
NC
USB+5V USB_P1
1-
USB_P1
1+
GND
1