Asus P5QL-EM - Manual (Page 29)

ASUS P5QL-EM 1-19
2.. USB.device.wake-up.(3-pin.PS2_USBPW)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
P5QL-EM.USB.Device.Wake.Up
P5QL-EM
R
3
2 2
1
USBPW1-4
+5V
(Default)
+5VSB
3
2 2
1
PS2_USBPW5-6
+5V
(Default)
+5VSB
3 2 2 1
USBPW9-12
+5V
(Default)
+5VSB
3 2 2 1
USBPW78
+5V
(Default)
+5VSB