Asus P9X79 - Manual (Page 101)

ASUS P9X79 3-35
Chapter 3
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By Keyboard [Disabled]
[Disabled] Disables the keyboard device from generating a wake event.
Configuration options to Enable keyboard to generate a wake event:
[Space Bar] [Ctrl-Esc] [Power Key]
Power On By Mouse [Disabled]
[Disabled] Disables the mouse device from generating a wake event.
[Enabled] Enables the mouse device to generate a wake event:
Power On By PCIE/PCI [Disabled]
[Disabled] Disables the PCIE/PCI devices from generating a wake event.
[Enabled] Enables the PCIE/PCI devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled] Disables the Ring device from generating a wake event.
[Enabled] Enables the Ring device to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC from generating a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values. Use <+>
and <-> keys to adjust the values.
ErP Ready [Disabled]
This item allows user to switch off some power at S5 to get the system ready for ErP
requirement. When set to Enabled, all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
3.5.7 APM
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Specify what state to go to when
power is re-applied after a power
failure (G3 state).
Back Advanced\ APM >
UEFI BIOS Utility - Advanced Mode
Restore AC Power Loss Power Off
Power On By Keyboard Disabled
Power On By Mouse Disabled
Power On By PCIE/PCI Disabled
Power On By Ring Disabled
Power On By RTC Disabled
ErP Ready Disabled