beautypg.com

Asus Maximus IV Extreme-Z User Manual

Page 120

background image

3-28

Chapter 3: BIOS setup

EuP Ready [Disabled]

[Disabled]

Disables the Energy Using Products (EuP) Ready function.

[Enabled]

Allows BIOS to switch off some power at S5 state to get system

ready for the EuP requirement. When set to [Enabled], power for

WOL, WO�USB, audio and onboard LEDs will be switched off at

S5 state.

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system

state was before the AC power loss.

Power On By PS/2 Keyboard [Disabled]

[Disabled]

Disables the Power On by a PS/2 keyboard.

[Space Bar] Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc]

Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.

[Power Key] Sets Power key on the PS/2 keyboard to turn on the system. This

feature requires an ATX power supply that provides at least 1A on

the +5VSB lead.

Power On By PS/2 Mouse [Disabled]

[Disabled]

Disables the Power On by a PS/2 mouse.

[Enabled]

Enables the Power On by a PS/2 mouse. This feature requires an

ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Enabled], the items RTC Alarm Date (Days) and

Hour/Minute/Second will become user-configurable with set

values.