Asus Maximus IV Extreme-Z - Manual (Page 122)

3-30 Chapter 3: BIOS setup
3.5.10 LED Control
The LED Control menu items allow you to change the advanced settings for the
onboard LEDs.
All LED Control [Enabled]
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
Take caution when changing the settings of the LED Control menu items.
Incorrect field values can cause the system to malfunction.
The following items appear only when you set All LED Control to [Enabled].
ROG Logo [Enabled]
Allows you to enable or disable the onboard ROG logo LED.
Configuration options: [Enabled] [Disabled]
Voltiminder LED [Enabled]
Allows you to enable or disable the onboard Voltiminder LED.
Configuration options: [Enabled] [Disabled]
CPU LED Selection [CPU]
Allows you to switch the onboard CPU LED display between CPU voltage [CPU],
VCCSA voltage [VCCSA], VCCIO voltage [VCCIO], and CPU PLL [CPU PLL].
Configuration options: [CPU] [VCCSA] [VCCIO] [CPU PLL]
PCH LED Selection [PCH]
Allows you to switch the onboard PCH LED display between PCH voltage [PCH],
and PCH PLL [PCH PLL]. Configuration options: [PCH] [PCH PLL]