Asus M4A88TD-V EVO/USB3 - Manual (Page 48)

2-30 Chapter 2: Hardware information
Chapter 2
2. AMD ® SB850 Serial ATA Serial ATA 6.0 Gb/s connectors (7-pin SATA 1/2/3/5/6)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk
drives and optical disc drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5,
or RAID 10 configuration through the onboard AMD ® SB850 controller.
• These connectors are set to IDE mode by default. In IDE mode, you can connect
Serial ATA boot/data hard disk drives to these connectors. If you intend to create a
Serial ATA RAID set using these connectors, set the type of the SATA connectors to
[RAID] in the BIOS. See section 3.4.2 SATA Configuration for details.
• You must install Windows ® XP Service Pack 2 or later version before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows ® XP SP2 or later version.
• When using hot-plug and NCQ, set the type of the SATA connectors to [AHCI] in the
BIOS. See section 3.4.2 SATA Configuration for details.
SATA3
GND
RSATA_TXP3 RSATA_TXN
3
GND
RSATA_RXP3 RSATA_RXN
3
GND
SATA1
GND
RSATA_TXP1 RSATA_TXN
1
GND
RSATA_RXP1 RSATA_RXN
1
GND
SATA6
GND
RSATA_TXP6 RSATA_TXN
6
GND
RSATA_RXP6 RSATA_RXN
6
GND
SATA2
GND RSATA_RXN
2
RSATA_RXP2 GND RSATA_TXN
2
RSATA_TXP2 GND
SATA5
GND RSATA_RXN
5
RSATA_RXP5 GND RSATA_TXN
5
RSATA_TXP5 GND
M4A88TD-V EVO
M4A88TD-V EVO SATA connectors
E5889_M4A88TD-V EVO_Contents V2.30 30 5/26/10 4:04:25 PM