Asus P5E-VM DO - Manual (Page 76)

2-26 Chapter 2: BIOS setup
2.4.3 TPM Configuration
The items in this menu allow you to set the TPM (Trusted Platform Module)
features. Select an item then press to display the configuration options.
TPM Configuration
TCG/TPM SUPPORT [NO]
Enable/Disable TPM
TCG (TPM 1.1/1.2)
supp in BIOS
TCG/TPM SUPPORT [YES]
Allows you to enable or disable TCG/TPM setting.
Configuration options: [YES] [NO].
The following items show when you set TCG/TPM SUPPORT option to [YES].
Execute TPM Command [Last setting]
Allows you to enable or disable the TPM security chip.
Configuration options: [Last setting] [Disabled] [Enabled]
TPM Enable / Disable Status [No State]
The item is not configurable.
TPM Owner Status [No State]
The item is not configurable.
To enable the TPM function, set the Execute TPM Command item to [Enabled]
and then save the change (see “2.8 Exit menu” for details). After the system
reboots, the TPM Configuration menu will change into the following one.
Clearing the TPM [Press Enter]
Allows you to clear the user information saved in the TPM security chip.
When you press , a warning message will appear to ask if you want
to clear the user information in the security chip. Use the left/right arrow key
to select between [Ok] and [Cancel], then press to confirm your
choice.
After you select [OK] to execute the Clearing the TPM function, the data saved
in the TPM security chip will be cleared and can never be restored.
TPM Configuration
Execute TPM Command [Last setting]
TPM Enable/Disable Status [Enabled]
Clearing the TPM [Press Enter]
TPM Owner Status [UnOwned]
Enable (Activate)/
Disable (Deactivate)
Command to TPM