Asus RS260-E3/RS8 - Manual (Page 56)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 3 6 2 - 3 6 2 - 3 6 2 - 3 6 2 - 3 6
To uninstall a power supply module:
1. Locate the power supply modules
on the rear panel, and select the
module that you want to remove.
3. Firmly pull the lever to slide the
power supply module out of the
chassis.
4. Repeat steps 2 to 3 to remove
the other module.
2. Hold the module lever and
press the latch on the inner
side to release the module.
2.7.3 2.7.3 2.7.3 2.7.3 2.7.3 Power supply modules Power supply modules Power supply modules Power supply modules Power supply modules
The barebone system ships with one power supply module. You may
purchase a second power supply module for redundancy.
P S U 1 P S U 1 P S U 1 P S U 1 P S U 1
P S U 2 P S U 2 P S U 2 P S U 2 P S U 2
2.7.2 2.7.2 2.7.2 2.7.2 2.7.2 Rear fans (60mm) Rear fans (60mm) Rear fans (60mm) Rear fans (60mm) Rear fans (60mm)
To uninstall the rear fans:
1. Remove the top cover screw.
2. Press the rear fan cage levers
inward.
3. Pull the fan cage from the chassis.
4. Set the rear fan cage aside.
Please remove AC power code, first. Unless, you can not press the latch.