Asus RS260-E3/RS8 - Manual (Page 135)

A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 A S U S R S 2 6 0 - E 3 6 - 1 1 6 - 1 1 6 - 1 1 6 - 1 1 6 - 1 1
6. Select C r e a t e n e w R A I D - 1 C r e a t e n e w R A I D - 1 C r e a t e n e w R A I D - 1 C r e a t e n e w R A I D - 1 C r e a t e n e w R A I D - 1 from the RAID-1 Build Option menu, then
press . Refer to the options description below.
7. When prompted, use the keyboard to assign a name for the RAID 1 set,
then press .
8. If you want to make the array
bootable, select Y e s
Y e s Y e s Y e s Y e s from the
menu, then press .
9. When prompted to create the RAID
1 set, select , then press
.
The utility erases all data from the selected hard disk drives. Make sure to
backup all important data before creating a RAID set.
10. When a confirmation dialogue box
appears, select , then press
.
• Create a New RAID-1 Create a New RAID-1 Create a New RAID-1 Create a New RAID-1 Create a New RAID-1 - The default option. Select this option when
creating a new RAID 1 set.
• Copy from ( 0) to ( 1) Copy from ( 0) to ( 1) Copy from ( 0) to ( 1) Copy from ( 0) to ( 1) Copy from ( 0) to ( 1) - Select this option when you want to copy
the source drive contents to a target drive, provided that the source is
equal to or smaller than the target drive.
• Copy from ( 1) to ( 0) Copy from ( 1) to ( 0) Copy from ( 1) to ( 0) Copy from ( 1) to ( 0) Copy from ( 1) to ( 0) - Select this option when you want to copy
the source drive contents to a target drive, provided that the source is
larger than the target drive.