beautypg.com

5 marvell raid utility, Marvell raid utility -7, Chapter 5 – Asus P8Z77-V PREMIUM User Manual

Page 167: Exiting the intel, Rapid storage technology option rom utility

background image

ASUS P8Z77-V PREMIUM

5-7

Chapter 5

2.

Press to exit or press to return to the utility main menu.

5.1.5

Marvell RAID utility

The onboard Marvell SATA 6.0 Gb/s controller allows you to create a RAID 0 or RAID 1 array

using two SATA hard disk drives. Refer to the section 1.2 Motherboard overview in your

motherboard user manual for the exact location of the Marvell SATA 6.0 Gb/s connector.
To enter the Marvell utility, press + during POST.

All exisiting data on the hard disk drives will be erased when creating or deleting a RAID

array. Ensure that you have back up all your data in your hard disk drives before making

any change to the drive status.

Exiting the Intel

®

Rapid Storage Technology Option ROM utility

To exit the utility:
1.

From the utility main menu, select 5. Exit, and then press . The following

warning message appears:

Are you sure you want to exit? (Y/N):

[ CONFIRM EXIT ]

Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.

Topology

Information

Help

Marvell RAID on chip controller.

ENTER: Operation F10: Exit/Save ESC: Return

HBA 0: Marvell 0

Virtual Disks

Free Physical Disks

PD 0: ST3160812AS

PD 8: ST3160812AS

Vendor ID :
Device ID :
Revision ID :
BIOS Version :
Firmware Version:
PCIe Speed Rate :
Configure SATA as:

1B4B
9130
B1
1.0.0.1028
2.2.0.1105
5.0Gbps
AHCI Mode