Asus Z9NH-D12 - Manual (Page 80)

4-14 Chapter 4: BIOS setup
Power Technology [Custom]
This item allows you to enable power management features.
Configuration options: [Disabled] [Energy Efficient] [Custom]
EIST [Enabled]
This item allows you to enable/disable Intel SpeedStep.
Configuration options: [Disabled] [Enabled]
Turbo Mode [Enabled]
Configuration options: [Disabled] [Enabled]
P-STATE Coordination [HW_ALL]
This item allows you to change P-STATE Coordination type.
Configuration options: [HW_ALL] [SW_ALL] [SW_ANY]
Enable the power
management features.
CPU Power Management Configuration
Power Technology [Custom]
EIST [Enabled]
Turbo Mode [Enabled]
P-STATE Coordination [HW_ALL]
CPU C3 Report [Disabled]
CPU C6 Report [Enabled]
CPU C7 Report [Disabled]
Package C State limit [C6]
Energy Performance [Balanced Performance]
Factory long duration power limit 95 Watts
Long duration power limit 0
Factory long duration maintained 10 s
Long duration maintained 0
Recommended short duration power 1 1.2 * Long Duration
Short duration power limit 0
4.4.2 CPU Power Management Configuration
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Local APIC mode [Auto]
Allows you to select APIC mode.
Configuration options: [Auto][x2APIC] [xAPIC]