Asus P5KPL-E - Manual (Page 78)

2-28 Chapter 2: BIOS setup
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press to display the
configuration options.
2.5.1 Suspend Mode [S1 (POS) only]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only]
[Auto]
2.5.2 ACPI 2.0 Support [Disabled]
Allows you to add additional tabled as per ACPI 2.0 specifications. Configuration
options: [Disabled] [Enabled]
2.5.3 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
Suspend Mode [S1 (POS) only]
ACPI 2.0 Support [Disabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
2.5.4 APM Configuration
APM Configuration
Resotre on AC Power Loss [Power Off]
Power Button Mode [On/Off]
Advanced Resume Event Controls
Power On By External Modems [Disabled]
Power On By PCIE Devices [Disabled]
Power On By PCI devices [Disabled]
Power On By RTC Alarm [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Select the Duty
Cycle in Throttle
mode.