Asus P5KPL-E - Manual (Page 73)

ASUS P5KPL-E 2-23
2.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
Configure North Bridge
features.
North Bridge Configuration
North Bridge chipset Configuration
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3328MB
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PCI-Express/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PCI-Express/Int-VGA]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI Express/Int-VGA] [Internal VGA] [PCI Express/PCI]
[PCI/PCI Express] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal graphics
device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]