beautypg.com

At4nm10t-i keyboard power setting, At4nm10t-i usb device wake up, Ps2_usbpw1-6 – Asus AT4NM10T-I User Manual

Page 18: Usbpw78

background image

ASUS AT4NM10T-I

1-8

3. USB device wake-up (3-pin USBPW7-8)

Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in

slow refresh, power supply in reduced power mode).

• The USB device wake-up feature requires a power supply that can provide 500mA on

the +5VSB lead for each USB port; otherwise, the system would not power up.

• The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

2.

Keyboard/mouse power and USB device wake-up (3-pin PS2_USBPW1-6)
This jumper allows you to enable or disable the keyboard/mouse and USB port 1-6

wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up

the computer by pressing a key on the keyboard, clicking the mouse or using a USB

device. This feature requires an ATX power supply that can supply at least 1A on the

+5VSB lead, and a corresponding setting in the BIOS. The USBPW1-6 jumper is for

the rear USB ports.

The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

AT4NM10T-I

AT4NM10T-I Keyboard Power Setting

PS2_USBPW1-6

2

1

2 3

+5V

+5VSB

(Default)

AT4NM10T-I

AT4NM10T-I USB Device Wake Up

2

1

2 3

+5V

(Default)

+5VSB

USBPW78