Asus P5GC - Manual (Page 65)

ASUS P5GC 4-7
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3. You can launch the EZ Flash 2 by two methods.
4.1.4. ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
+ during the Power-On Self-Test (POST).
(2) Enter BIOS setup program. Go to the Tools menu to select EZ.Flash2
and press to enable it.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press + during POST to display the following.
You can switch between drives by pressing before the correct file
is found. Then press .
• This function can support devices such as USB flash disk, or floppy disk
with FAT.32/16.format only.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
ASUSTek EZ Flash 2 BIOS ROM Utility V3.06
Current ROM Update ROM
A :
FLASH TYPE: MXIC 20L8005
PATH: A:\
BOARD: P5GC
VER: 0103
DATE: 08/16/07
BOARD: Unknown
VER: Unknown
DATE: Unknown