Overview – Asus P5GC User Manual
Page 35
ASUS P5GC
2-13
2.4
System memory
2.4.1.
Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory
Modules (DIMM) sockets.
The figure illustrates the location of the DDR2 DIMM sockets:
2.4.2
Memory configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR2 DIMMs into
the DIMM sockets.
Channel
Sockets
Channel A
DIMM_A1 and DIMM_A2
Channel B
DIMM_B1 and DIMM_B2
P5GC.240-pin.DDR2.DIMM.Sockets
P5GC
128 Pins
112 Pins
DIMM_A2
DIMM_B1
DIMM_B2
DIMM_A1
• You may install varying memory sizes in Channel A and Channel B. The
system maps the total size of the lower-sized channel for the dual-channel
configuration. Any excess memory from the higher-sized channel is then
mapped for single-channel operation.
• For single-channel configuration, install either two single-sided memory
modules or one double-sided memory modules.
• Install single-sided memory modules when using four DDR2 DIMM
modules.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules from the
same vendor. Visit ASUS websie (www.asus.com) for the latest Qualified
Vendor Lists.
• If you install two1 GB memory modules, the system may only recognize
less than 2 GB because the address space is reserved for other critical
functions. This limitation appears on Windows
®
XP 32-bit operation system
which does not support Physical Address Extension (PAE).
• If you install Windows
®
XP 32-bit operation system, a total memory of less
than 2 GB is recommended.