Asus A7S266-VM/U2 - Manual (Page 54)

2-24 Chapter 2: BIOS Information
2.6 Boot Menu
Boot Sequence
The Boot menu allows you to select four types of boot devices using the up and down
arrow keys. By using the <+> or key, you can promote devices and by using
the <-> key, you can demote devices. Promotion or demotion of devices alters the
priority which the system uses to boot device on system power up. Configuration
fields include Removable Devices, IDE Hard Drive, ATAPI CD-ROM and Other Boot
Device.
Removable Device [Legacy Floppy]
Configuration options: [Disabled] [Legacy Floppy] [LS-120] [ZIP] [ATAPIMO] [USB
FDD] [USB ZIP/Flash]
IDE Hard Drive
This field allows you to select which IDE hard disk drive to use in the boot
sequence. Pressing [Enter] will show the product IDs of all connected IDE hard
disk drives.
ATAPI CD-ROM
This field allows you to select which ATAPI CD-ROM drive to use in the boot
sequence. Pressing [Enter] will show the product IDs of all your connected ATAPI
CD-ROM drives.
If any of the monitored items is out of range, the following error message
appears: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue or DEL to enter
SETUP”.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.