Asus A7S266-VM/U2 - Manual (Page 25)

ASUS A7S266-VM/U2 Motherboard 1-15
4. USB headers (10-1 pin USB56, USB34)
If the USB ports on the rear panel are inadequate, a USB header is
available for additional USB ports. The USB header complies with USB
2.0 specification that supports up to 480 Mbps connection speed. This
speed advantage over the conventional 12 Mbps on USB 1.1 allows
faster Internet connection, interactive gaming, and simultaneous
running of high-speed peripherals.
You may connect an optional USB 2.0/GAME module, connect the
USB cable to this header. The module has two USB 2.0 ports that
support the next generation USB peripherals such as high resolution
cameras, scanners, and printers.
The USB module is not included in the package.
5. Floppy disk drive connector (34-1 pin FLOPPY1)
This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the floppy
drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon
cables with pin 5 plug).
A7S266-VM/U2
®
NOTE: Orient the red markings on
the floppy ribbon cable to
PIN 1
A7S266-VM/U2 Floppy Disk Drive Connector
PIN 1
A7S266-VM/U2
®
A7S266-VM/U2 Front Panel USB Headers
USB56
USB Power USBP6– USBP6+ GND NC
USB Power
USBP5– USBP5+
GND
2 10
1 9
USB34
USB Power USBP4– USBP4+ GND NC
USB Power
USBP3– USBP3+
GND
2 10
1 9