Asus WL-100gE - Manual (Page 5)

ASUS WLAN Card 5
Quick Start Guide
English
Configuring the WLAN utility
After installing the WLAN Card Utilities, you will need to make some
settings before being able to use your wireless connection. Double-click
the WLAN Control Center icon to start the utility.
6. You can also see the connection quality on
the “Connection” page. Click OK to exit the
utility.
5. Check the “Status” page to see the “Asso-
ciation State”. It should show “Connected -
xx:xx:xx:xx:xx:xx”.
3. Use “Site Survey” if you don’t know the
name of your access point(s).
4. Encryption settings must also match those
set in the access point. Ask your network
administrator about settings if necessary.
Click Apply to save your settings
1. Right-click the WLAN icon and select “Wire-
less Settings”
2. Set the Network Name (SSID) to the same
name as the SSID set in your wireless ac-
cess point.