Asus WL-100gE - Manual (Page 18)

18 ASUS WLAN Card
Quick Start Guide
English
Click Apply to save and activate the new configurations.
sent separately to the destination. Enable fragmentation by setting a specific packet
size threshold. If there is an excessive number of collisions on the WLAN, experiment
with different fragmentation values to increase the reliability of frame transmissions.
The default value (2346) is recommended for normal use.
Preamble Mode
This parameter is used to control whether frames will transmit with the Long or Short
Preamble. The default value is Long Tx Preamble.
Frame Bursting
Frame Bursting technology is standards-based Wi-Fi performance enhancement
technology that improves wireless network efficiency and boosts throughput.
54g Mode
54g LRS (Limited Rate Support) - is used to communicate with older 11b clients
that only support 4 rates. But 54g cards can still use all 12 rates.
54g Auto - support both 802.11b and 802.11g adapters.
54g Performance - will support ONLY high-performance 54g adapters.
All of these modes only pertain to when the STA is creating their own IBSS network.
802.11b only - support both 802.11b adapters.
All of these modes only pertain to when the STA is creating their own IBSS network.
The default ad-hoc mode is 802.11b only.
54g Protection
Extended Rate PHY (ERP) protection mechanism of 802.11g definition.
Auto – Automatically change as AP announcement.
Enabled - Always send frame with protection.
Disabled - Always send frame without protection.
Power Output
Indicates transmit power level.
Afterburner
It’s is a proprietary solution to take advantage of the high data rate (125 Mbps), the
consumer will have to possess a wireless card and router compliant with the Afterburner
technology.