Asus P/I-AP6N - Manual (Page 13)

ASUS P/I-AP6N User’s Manual 13
III. INSTALLATION
Jumper Settings
1. Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position.
Programming BBLKW
Disabled
[1-2] (Default)
Enabled [2-3]
R
Boot Block Programming (Disable / Enable)
Disabled / Protected
(Default) Enabled
1
2
3 1
2
3
BBLKW BBLKW
III. INST
ALLA
TION
(Jumpers)