Asus P5QL SE - Manual (Page 56)

2-20 Chapter 2: BIOS setup
Resume.On.PCI.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a PCI LAN
or modem card. This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.PCIE.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a PCI Express
card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to
[Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm
Second appear with set values. Configuration options: [Disabled] [Enabled]
2.5.5. Hardware.Monitor
CPU.Temperature.[xxxºC/xxxºF]..
MB.Temperature.[xxxºC/xxxºF].
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select [Ignored] if you do not wish to display the detected temperatures.
CPU.Fan.Speed.[xxxxRPM].or.[Ignored]
The onboard hardware monitor automatically detects and displays the CPU fan speed in
rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows
N/A.
CPU.Q-Fan.Control.[Disabled]
Allows you to enable or disable the CPU Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The CPU Fan Profile item appears when you enable the CPU Q-Fan Control feature.
CPU Fan Profile [Optimal]
Allows you to set the appropriate performance level of the CPU fan.
Configuration options: [Optimal] [Silent Mode] [Performance Mode]
VCORE.Voltage,.3.3V.Voltage,.5V.Voltage,.12V.Voltage.[xxxxV].or.[Ignored].
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignored] if you do not want to detect this item.