Asus PIKE 2008/IMR - Manual (Page 19)

ASUS PIKE 2008/IMR 2-5
3. The Adapter Selection screen appears. If the system has multiple SAS
adapters, select an adapter.
4. Click Start to continue. The main WebBIOS CU screen appears.
2.2.1 Starting the WebBIOS CU
Follow these steps to start the WebBIOS CU and access the main screen.
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press when the following screen appears
Press for Preboot CLI: this option is for advanced debug only!
LSI MegaRAID SAS-MFI BIOS
Version 4.15.00 (Build June 03, 2010)
Copyright(C) 2010 LSI Corporation
HA -0 (Bus 4 Dev 0) LSI MegaRAID ROMB
FW package: 20.7.1-0016
Battery Status: Not present
PCI SLOT ID LUN VENDOR PRODUCT REVISION
-------- -- --- ------ ------- --------
5 LSI LSI MegaRAID ROMB
5 0 0 ATA Hitachi HDS72161 AB3A
5 0 0 ATA Hitachi HDS72161 AB3A
5 0 0 ATA Hitachi HDS72161 AB3A
5 0 0 ATA Hitachi HDS72161 AB3A
3 JBOD(s) found on the host adapter.
3 JBOD(s) handled by BIOS
0 Virtual Drive(s) found on the host adapter.
0 Virtual Drive(s) handled by BIOS
Press for WebBIOS or press for Preboot CLI